Check these out!!
Nebuli SE's with Blue Twill Carbon Fiber flame inlays.
I haven't mentioned that I would be attempting this, as I wasn't sure I'd be able to pull it off.
The C/F is .040 thick, and was machined on double sided tape with a .030 diameter carbide end mill.
I roughed the pocket in the frame with a .0625 mill, and finished it with the .030 mill.
It took all of yesterday, and today to finish these up.
I'm really pleased with the end results, so I'll be keeping one of the four right here for posterity;)
Today's offering:
All of the Nebuli feature a CPM S30-V blade, and a one piece Titanium integral frame.
Physical dimensions are, .375 thick, 1.000 wide, and 2.500 closed, and 3.875 opened.
Actual cutting edge is 1.500 in length.
0 Nebuli SE's with Blue Twill C/F flame inlay ,and a custom Titanium thumb disk anodized Blue . $415.00. !!Sold!!
Please note, that I'm not responsible for OCONUS items once they hit the PO.
OCONUS shipping is via USPS Priority International mail.
Email me at jordanmetalart@gmail.com to make a purchase.
Please include the model type you're interested in within your correspondence.
Thank you all,
Kenn
Posts
8 comments:
Nice job Kenn!
Thank you Mark.
Cool! Gary :>)
Thanks Gary.
Kenn,
Great job with the Blue theme between the thumbdisc and the Blue Twill C.F.flame.
You are setting new personal best records!
great work!
John
Thank you John,
The "Ford" logo for my Boss was the catalyst to these.
Once I figured out how to get the logo into the Master Cam software, and manipulate it it opened the door. I searched the web for flame images, and tweaked one I liked to fit my needs.
The possibilities are endless:)
Kenn,
"The possibilities are endless:)"--peaks my interest very, very much!!!!
John
Nice job Kenny. CF+Flame = COOL!
Post a Comment